High torque heavy duty gearboxes are essential for powering long-distance conveyors, grinding mills, and bulk material handling systems in mining, cement, and steel industries. These units deliver reliable performance under continuous high-load conditions where downtime is extremely costly.
Огляд продукту
These gearboxes serve overland conveyors, ball mills, sag mills, and apron feeders. Core strengths include exceptional torque capacity, robust shock load handling, and the ability to operate continuously in dusty, high-temperature environments typical of mining and mineral processing plants.
Технічні параметри
| Параметр | Діапазон специфікацій |
|---|---|
| Вхідна потужність | До 6000 кВт |
| Вихідний крутний момент | До 1500000 Нм |
| Діапазон співвідношення | 8:1 to 450:1 |
| Вхідна швидкість | До 1800 об/хв |
| Варіанти монтажу | Опора, фланець, кріплення на валу з важелем крутного моменту |
| Температура навколишнього середовища | -35 degrees C to +55 degrees C |
| Рейтинг захисту | Стандарт IP66 |
Принцип роботи
Power from the electric motor is transmitted through a high-speed pinion into multiple reduction stages of helical or bevel-helical gears. Each stage increases torque while reducing output speed. The final low-speed shaft connects directly to the conveyor pulley or mill pinion. A reinforced housing and oversized bearings absorb the heavy starting torques and shock loads common in these applications.
Основні переваги
Handles peak starting torques of conveyors and mills without damage to gears or bearings.
Reinforced housing and optimized gear tooth profiles withstand sudden overloads from jammed material.
Designed for 24/7 operation with minimal maintenance in remote mining locations.
Precision ground gears achieve high efficiency, reducing energy consumption on long conveyors.
Foot, flange, and shaft-mounted options with torque arms simplify installation on existing structures.
Advanced sealing and forced lubrication systems allow longer periods between oil changes.
Конструкція та матеріали майстерності
Housings are fabricated from high-strength steel plate or heavy cast iron with internal ribbing for maximum rigidity. Gears are precision ground from case-hardened alloy steel. Large-diameter shafts and oversized spherical roller bearings handle combined radial and axial loads. Multiple labyrinth and lip seal stages provide excellent protection against abrasive dust.
Типові сценарії застосування
Наземні конвеєри: Transmits power to the head pulley of long-distance belts transporting ore or coal from mine to processing plant. High torque handles full load starts reliably.
Ball and SAG Mills: Provides the massive starting torque and continuous low-speed power required for grinding operations in mineral processing.
Apron Feeders: Delivers controlled high torque to heavy apron feeders handling large lumps of material at the primary crusher discharge.
Керівництво з вибору
Calculate required output torque including starting torque and service factor. Determine exact ratio needed for desired belt or mill speed. Consider mounting position, available space, and ambient conditions. Evaluate thermal capacity for continuous operation and confirm adequate lubrication system for remote sites. Discuss pulley diameter, belt tension, and any future capacity increases with the engineering team.
Порівняння з іншими брендами
The table below lists common equivalent models for reference. EVER POWER is an independent Dutch company and does not produce or sell counterfeit products of any brand. This information assists with cross-brand selection only.
| Модель EVER POWER | Еквівалент SEW | Еквівалент Флендера | Еквівалент Сумітомо | Примітка щодо вибору ключа |
|---|---|---|---|---|
| EP-HT-1000 | X4K 315 | Б4Ш 11 | Парамакс 11000 | Long overland conveyor |
| EP-HT-1500 | X5K 355 | Б5Ш 13 | Парамакс 13000 | Ball mill primary drive |
| EP-HT-2200 | X6K 400 | Б6Ш 14 | Парамакс 15000 | SAG mill or apron feeder |
Сертифікація якості та зобов'язання щодо обслуговування
Усі редуктори виробляються відповідно до стандарту управління якістю ISO 9001:2015 та мають маркування CE. На матеріали та виготовлення надається щонайменше дворічна гарантія. Глобальна технічна підтримка, запасні частини та обслуговування на місці доступні в головному офісі в Нідерландах та уповноважених партнерах.
Часті запитання
Q: What service factor is recommended for conveyor applications with frequent starts?
A: A minimum service factor of 1.8 to 2.0 is advised for conveyors with frequent loaded starts to account for high starting torque.
Q: How is lubrication handled on remote mining sites?
A: Forced lubrication with oil coolers and condition monitoring is standard. Oil analysis programs help extend change intervals.
Q: Can these gearboxes be supplied with condition monitoring sensors?
A: Yes. Vibration, temperature, and oil condition sensors can be factory-fitted for integration with plant SCADA systems.
Q: What is the typical lead time for a high torque unit?
A: Standard configurations are available in 8 to 12 weeks. Fully custom designs with special ratios or cooling systems require 14 to 18 weeks.
Q: Are spare parts readily available for older models?
A: Yes. Critical components including gears, bearings, and seals are stocked for both current and legacy high torque series.
Тематичні дослідження – польові нотатки інженера
Чилі – Large copper mine in the Atacama Desert. A high torque gearbox was installed on a 6.2 km overland conveyor. After 22 months of continuous operation the maintenance team reported zero unplanned stops and confirmed excellent performance in extreme dust and temperature conditions.
Канада – Gold processing plant in northern Ontario. The unit drives a large SAG mill. The operations manager noted smooth starting under full load and stable oil temperatures even during winter operation at -35 degrees C.
Південна Африка – Platinum mine near Rustenburg. Installed on a primary crusher apron feeder. Site records show reduced energy consumption compared with the previous supplier and successful completion of the first major service interval without gear or bearing issues.
Заклик до співпраці
EVER POWER, a Dutch company with deep expertise in high torque power transmission for mining and bulk handling, welcomes the opportunity to support your next conveyor or mill project. Our engineers can review your torque requirements, layout constraints, and duty cycle to recommend the optimal configuration.
Відвідайте головний сайт for more product information. For detailed specifications, application review, or a formal quotation, please use the контактна форма. We are ready to deliver reliable, high-performance solutions tailored to your operation.